High-quality brushless BLDC motor (outrunner) for model aircraft. The BOOST motor series is the result of our more than 15 years of experience in the field of modern electric drives.
Product features
- Highest manufacturing quality
- Perfect ventilation thanks to open housing design
- Use of the best materials
- High temperature resistant neodymium magnets
- Extra large quality ball bearings
Area of application – model/take-off weight
- 3D aerobatic models up to approx. 800g
- aerobatic models up to approx. 900g
- trainers up to approx. 1000g
- gliders up to approx. 1500g
Scope of delivery
- BOOST 20 brushless motor
- XQ+ 35 A brushless controller
- Mounting cross made of aluminum
- Propeller adapter for front bulkhead/rear bulkhead assembly
- Fastening screws
- Instructions in German/English
You can find an overview of all BOOST brushless motors here
Technical data
Dimensions Ø = 35mm / L = 30mm
Weight = 83g
Shaft diameter = 4.0mm
LiPo battery (recommended) = 2 -3 Cells
Idle speed per volt = 1190 rpm-1 (KV)
Max. load = 25A (10s)
Propeller (recommended)
PI-CON 12×6, 11×7 (at 2S)
PI-CON 9×5, 8×6 (at 3S)
LiPo battery (recommended)
LEMONRC 1800-7.4
LEMONRC 2200-11.1V
Special accessories (recommended)
Pichler programming box, # 15966
Note: Of course, other propellers (e.g. 3-blade or smaller sizes) than those specified here can be used. Batteries with other, e.g. higher, capacities can also be used. Please ensure that the permissible currents (A) are not exceeded. We recommend our tried and tested POWER WATTS 150, # C7282, for easy current measurement. A device that you always need and that should not be missing from any equipment.
Bumper, front (1)/ rear (1) (fits TRX-4MT™ with #9812 body)
13,90 €
