High-quality brushless BLDC motor (outrunner) for model aircraft. The BOOST motor series is the result of our more than 15 years of experience in the field of modern electric drives.
Product features
- Highest manufacturing quality
- Perfect ventilation thanks to open housing design
- Use of the best materials
- High temperature resistant neodymium magnets
- Extra large quality ball bearings
Area of application – model/take-off weight
- 3D aerobatic models up to approx. 1000g
- aerobatic models up to approx. 1400g
- trainers up to approx. 1800g
- gliders up to approx. 2000g
Scope of delivery
- BOOST 25 brushless motor
- XQ+ 35 A brushless controller
- Mounting cross made of aluminum
- Propeller adapter for front bulkhead/rear bulkhead assembly
- Fastening screws
- Instructions in German/English
You can find an overview of all BOOST brushless motors here
Technical data
- Dimensions Ø = 35mm / L = 36mm
- Weight = 113g
- Shaft diameter = 4.0mm
- LiPo battery (recommended) = 2 -3 Cells
- Idle speed per volt = 980 rpm-1 (KV)
- Max. load = 30A (10s)
Propeller (recommended)
- PI-CON 12×6, 11×7 (at 2S)
- PI-CON 10×5 (at 3S)
LiPo battery (recommended)
- LEMONRC 2200-11.1V
- LEMONRC 2600-11.1V
Special accessories (recommended)
Pichler programming box, # 15966
Note: Of course, other propellers (e.g. 3-blade or smaller sizes) than those specified here can be used. Batteries with other, e.g. higher, capacities can also be used. Please ensure that the permissible currents (A) are not exceeded. We recommend our tried and tested POWER WATTS 150, # C7282, for easy current measurement. A device that you always need and that should not be missing from any equipment.