Quick Setting Metal Epoxy Adhesive is perfect for repairing appliances, tools, etc. It bonds most metals including copper, steel, stainless steel, aluminum, brass and iron. This product sets in only 5 minutes and the final cure color is light gray.
Directions:
1. Surfaces should be clean and dry, free from oil and grease.
2. Roughen surfaces with emery cloth or sandpaper for best results.
3. Dispense from container following package directions & mix thoroughly until color is uniform, approximately 1 minute.
4. Apply to both surfaces and mate parts together.
5. Remove excess epoxy immediately with denatured alcohol.
6. Sets in 4-6 minutes at room temperature (77°F or 25°C) with full cure in 24 hours.
Works Best On:
- Aluminum
- Brass
- Copper
- Iron
- Stainless Steel
- Steel
Technical Specifications:
Initial color: Light gray
Final color: Hazy-clear
Maximum Gap: .25”
Hardness, Shore D: 75-85 (After full cure)
Shear Strength, Steel: 2500 psi (± 20%); Aluminum: 840 psi (± 20%)
Set Time: 4-6 minutes @ 65-80°F
Handling Time: After 1 hour
Full Strength: 24 hours
Operating Temperature Range:-40 to 300°F (-40 to 149°C)
