High-quality brushless BLDC motor (outrunner) for model aircraft. The BOOST motor series is the result of our more than 15 years of experience in the field of modern electric drives.
Product features
- Highest manufacturing quality
- Perfect ventilation thanks to open housing design
- Use of the best materials
- High temperature resistant neodymium magnets
- Extra large quality ball bearings
Area of application – model/take-off weight
- 3D aerobatic models up to approx. 350g
- Aerobatic models up to approx. 400g
- Scale models and trainers up to approx. 500g
- Gliders up to approx. 600g
Scope of delivery
- BOOST 10 brushless motor
- Mounting cross made of aluminum
- 1 propeller adapter each for front bulkhead and rear bulkhead assembly
- Fastening screws
- Replacement motor shaft
- Instructions in German/English
Technical data
- Dimensions Ø = 28mm / L = 25mm
- Weight = 49g
- Shaft diameter = 3.2mm (3.175mm)
- LiPo battery (recommended) = 2 -3 cells
- Idle speed per volt = 1400 RPM-1 (KV)
- Max. load = 10A (20s)
- Brushless controller (recommended) = PICHLER XQ+ 15, # 15919
Propeller (recommended)
- PI-CON 7×5, # C5745 @ 2S LiPo (7.4V)
- PI-CON 6×4, # C5744 @ 3S LiPo (11.1V)
LiPo battery (recommended)
- LEMONRC 1000-7.4
- RED POWER 1100-11.1V
Note Of course, other propellers (e.g. 3-blade or smaller sizes) than those specified here can be used. Batteries with other, e.g. higher, capacities can also be used. Please ensure that the permissible currents (A) are not exceeded. For simple power measurement, we recommend our proven POWER WATTS 150, # C7282. A device that is always needed and should be part of every equipment.