Super SUV
Since the first generation model release in 1951, the Toyota Land Cruiser has been one of the most famous 4WD vehicles in the world. This R/C model assembly kit recreates the Land Cruiser 300 series announced in 2021. The polycarbonate body realistically depicts the eye-catching, dignified form with separate parts to capture the distinctive large front grille’s horizontal fins and metal-plated sections. Light case and door mirror components are metal-plated, and door handles and shark fin antenna on roof are rendered by separate parts for more realism. Silver color 12-spoke wheels are paired with block pattern tires.
CC-02 Chassis – Off Road, Evolved
Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis’ ladder frame is inspired by full-size vehicles and is the base for its superior durability. A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Four-link rigid suspension is employed front and rear, with CVA oil dampers for all-encompassing control, even on tricky rock sections. This model comes with black twelve-spoke wheels and grippy block pattern tires.
Specifications
- Length: 472mm, width: 200mm, height: 192mm
- Wheelbase: 267mm
- Tread: 160mm (front), 163mm (rear)
- Tire width/diameter: 33/90mm (front & rear)
- Ladder frame
- Longitudinal motor, shaft-driven 4WD
- 3-bevel differential gears
- 4-link rigid suspension (front & rear) & CVA oil dampers
- Gear ratio = 17.33:1 (using kit-standard 16T pinion)
- Type 540 motor
- Electronic Speed Controller (ESC) is sold separately.
About the model
- The majestic form of the car is captured neatly by a polycarbonate body.
- The model features a metal-plated depiction of the radiator grille, and other separate parts for the bumper grille.
- Side mirrors are accurately recreated using separately molded parts.
- Take a closer look at the stylish shark fin antenna, also a separately molded component.
- Stickers recreate taillights and the toyota emblem. The body is compatible with separately sold LEDs.
- Both front and rear ends of the CC-02 chassis utilize 4-link rigid setups with shock absorption provided by CVA oil dampers.
- The motor is mounted in the chassis front-middle; power goes via gearbox and propeller shafts to front and rear axles.
- Up to 20 different gear ratios can be achieved with reassembly of the gearbox and use of separately sold pinion gears.
- Reinforced plastic axle housings each contain a differential, which can be locked with reassembly.
- Silver color 12-spoke wheels are paired with block pattern tires.
Please note! This is a true-to-scale 1/10 model kit that requires assembly and painting. Paints, electronic components and tools are not included in the kit!
Additionally needed electronics
Here are our recommendations for this model. Of course, you can also choose other suitable parts. If you have any questions about compatibility, please do get in touch with us!
- Redox TX-ONE transmitter with RX-ONE receiver
- Tower Pro digitaalne servo MG958
- Hobbywing QuicRun WP 1060 ESC 60A (Brushed) 2-3S Car 1/10
- Redox NiMH battery 7,2V 3500mAh (Tamiya connector) (alternatives: Redox NiMH battery 7,2V 5000mAh (Tamiya connector), Vapex NiMH battery 7,2V 2500mAh (Tamiya connector), Vapex NiMH battery 7,2V 3000mAh (Tamiya connector), Vapex NiMH battery 7,2V 4000mAh (Deans connector))
- HotRC N8 1-8S NiMH charger (20W)
- Varta Super Heavy Duty R6 AA battery 4-pack
Recommended colours
These are the colours recommended in the Tamiya guide. You are always free to choose your own colour scheme. You can find all our colours here.
- Tamiya PS-1 White (alternatives: White R/C Racing Spray Paint 150 ml)
- Tamiya PS-57 Pearl White
- Tamiya TS-29 Black (Semi Gloss) (alternatives: Tamiya Mini X-18 Semi Gloss Black)
- Tamiya TS-45 Pearl White (Gloss)
If necessary, we can help with assembling the model and painting the bodywork – please get in touch with us.
| Weight | 2,7620 kg |
|---|---|
| Dimensions | 492,0000 × 234,0000 × 222,0000 mm |
Related products
Tamiya Ford Baja Bronco Crawler (CC-02)
10 available on backorder, delivery 26.11.2026 - 03.12.2026
Tamiya Ford Bronco 2021 Crawler (CC-02)
1 in stock, delivery in 1-2 business days
Pre-order, estimated delivery 17.12.2026 - 28.12.2026
Traxxas TRX-4 Kit Clipless
20+ available on backorder, delivery 26.11.2026 - 01.12.2026
