High Quality Brushless Motor BLDC (Outrunner) for model airplanes. The BOOST motor series is the result of our over 15 years of experience in developing modern elektric power sets.
Features
- Premium Craftmanship
- Perfect ventilation for the whole motor
- Only the best materials are used for production
- High temperature resistant Neodym Magnets
- Oversized large ball bearings (3 ball bearings total)
Ideal for – Model flying weight
- 3D Aerobatic airplanes up to 1000g
- Aerobatic airplanes up to 1400g
- Trainer models up to 1800g
- Gliders up to 2000g
Content
- BOOST 25 Brushless Motor
- Machined Aluminium mounting cross
- Prop adapters front and rear
- Bits and Screws
- Manual German/English
| Specifications | |
| Dimensions |
Ø = 35mm / L = 36mm |
| Weight |
113g |
| Shaft Diameter |
4.0mm |
| No. of LiPo Cells |
2 -3 Zellen |
| KV / Revs per Volt |
980 U/Min-1 (KV) |
| Max. Power Load / 30s |
30A |
| Brushless Speed Controller (recommended) |
PICHLER XQ-30, # C3056 |
| Propeller (rec.) |
PI-CON 10×5, # C5749 @ 3S LiPo (11,1V) |
| LiPo battery (rec.) |
LEMONRC 2200-11,1V, # C6733 |
Attention: Smaller propellers and multi blade props can be used other than mentioned. Also, batteries with different capacities can be used according to your needs. Please always make sure, the maxium power load (A) will not be exceeded. We highly recommend you to monitor the power using our POWER WATTS 150, Order N. C7282. This device should be always at your hands.
