Name: Suspension Arms Front Blue (2+2) 1/16 E-Revo
Brand: RPM Products
SKU: RPM80695
Availability: InStock

Kirjeldus

Quick Notes:

Replaces stock Traxxas #7131
Matching Rear A-arms are available
Matching Axle Carriers are available

Upon the release of the Traxxas 1/16th E-Revo, we immediately started receiving requests for durability upgrades. What better place to start than the front A-arms? With our guaranteed unbreakable material and a proven A-arm design based off of our larger, 1/10th scale Revo A-arms, durability for these little monsters has arrived!

A significant problem we have been able to eliminate was slop in the suspension system. In some cases, we found as much as 1/32” of slop in the stock A-arms! That has been remedied with these new RPM versions. Our A-arms eliminate nearly all of the A-arm slop, which allows camber, caster and toe angle settings to be more solidly fixed in position. The result: A smoother, more consistent steering and suspension system with a significantly reduced tendency for the truck to randomly wander while driving.

Unique to RPM suspension arms is our angled leading and trailing edges. We incorporate a 30-degree bevel in these areas, which reduces the chance of breaking suspension parts since the A-arm will naturally try to transition over objects instead of bluntly plowing into them.

RPM front A-arms for the Traxxas 1/16 E-Revo are sold in sets of four – both upper and both lower a-arms.

Lisainfo

Kaal	0,03 kg
Mõõtmed	150 × 100 × 10 mm

Lähemalt RPM Products

RPM was established in 1974 as a plastic mold making and injection molding facility. Many of the first high tolerance, precision molded parts built by RPM were for the commercial and medical industries, where accuracy is critical. It wasn’t until the mid 1980’s that RPM began designing parts for the R/C industry. These parts were of the same quality and precision that exist in the injection-molded parts we build to this day. Since RPM’s inception, we have expanded our mold making capacity by purchasing some of the best machine tools available. In addition, RPM has a complete injection molding facility in-house. Every single molded product made by RPM is conceived, designed, built and manufactured in our facility, right here in Chino, California USA! Very few manufacturers have the capabilities that RPM has for full in-house production. This ability to design, manufacture and produce our own products gives us the best possible quality control over our parts. Excellent quality control, in turn, gives our customers the best possible parts!

KÜLASTA MEID

TASUTA SAATMINE

TEKKIS KÜSIMUS?

Suspension Arms Front Blue (2+2) 1/16 E-Revo

Bellcrank bushings (plastic) (4x7x2.5mm) (4)

Decal sheets, 1/16 E-Revo

Hex wrenches; 1.5mm, 2mm, 2.5mm, 3mm, 2.5 ball

Screws, 2.5x12mm cap-head machine (6)

Kontaktid

Menüü

Kasulikud lingid