Oversized Front Axle Carriers X-Maxx (Pair)

31,00 

2 laos

Tootekood: RPM80662 Kategooria:
Kirjeldus
Quick Notes:

  • Replaces stock Traxxas #7737
  • Includes gigantic 20x32x7mm inner bearings
  • Massive steering support ribs for the strongest possible carriers
  • Outer bearings not included (stock bearings are used)
  • Sold in pairs (1 – left and 1 – right)

RPM Oversized Front Axle Carriers for the Traxxas X-Maxx were designed to solve two key issues reported by owners of these massive beasts. The first issue being durability. We designed these carriers to handle some serious abuse. RPM Oversized Axle Carriers are BEEFY with massive steering support ribs for the strongest possible carriers available.

The other area of improvement comes in the form of larger inner bearings. How large? MASSIVE! The stock inner bearings are a mere 20x27x4mm while the oversized bearings we use are gigantic 20x32x7mm bearings! That’s 5mm larger on the diameter and 3mm on the width! The difference equates to a dynamic load rating that is nearly 300% higher than the stock bearings while the static load rating is over 300% higher! That’s triple the strength of the stock inner bearings.

If you’ve ever blown a stock inner bearing or broken a stock front axle carrier, you need to check these out! Our Oversized Front Axle Carriers are molded in black and backed by our limited lifetime breakage warranty. You can’t go wrong with RPM parts on your X-Maxx.

Tech Notes: RPM Oversized Front Axle Carriers for the Traxxas X-Maxx replace stock Traxxas #7737. Each package is sold as a pair (one left and one right) and includes two inner oversized bearings (one for each side). Outer bearings are stock Traxxas bearings (#5106 or #5106A) and are not included in this kit.

Lisainfo
Kaal 0,092 kg
Mõõtmed 110 × 100 × 5 mm
Lähemalt RPM Products
RPM was established in 1974 as a plastic mold making and injection molding facility. Many of the first high tolerance, precision molded parts built by RPM were for the commercial and medical industries, where accuracy is critical. It wasn’t until the mid 1980’s that RPM began designing parts for the R/C industry. These parts were of the same quality and precision that exist in the injection-molded parts we build to this day. Since RPM’s inception, we have expanded our mold making capacity by purchasing some of the best machine tools available. In addition, RPM has a complete injection molding facility in-house. Every single molded product made by RPM is conceived, designed, built and manufactured in our facility, right here in Chino, California USA! Very few manufacturers have the capabilities that RPM has for full in-house production. This ability to design, manufacture and produce our own products gives us the best possible quality control over our parts. Excellent quality control, in turn, gives our customers the best possible parts!