Tamiya Volvo FH16 Globetrotter 750 8×4 1/14 tow truck

To the Rescue!

Volvo is a renowned actor in the global commercial vehicle market, with one of their flagship brands being the FH Series that underwent a full model change in 2012. This R/C model assembly kit recreates the 750hp engine FH16 Globetrotter 750 8×4 tow truck from that range. The model has a realistic cab and body, the former featuring a photo-etched front grille and interior details, the latter opening doors. Its fascinating towing mechanism uses plenty of metal parts and winch boom, underlift and outriggers are movable manually. The front mounted TR Mighty Tuned motor (35T) provides ample power to the two rear axles, via a three-speed transmission. Gear changes are also possible via transmitter controls, and the model can tow subjects such as 1/14 scale R/C tractor trucks.

Specifications

• Length: 732mm
• Width: 199mm
• Height: 309mm
• Weight (with R/C equipment and battery pack): Approx. 5.9kg
• Wheelbase: 155 + 245 + 103mm
• Tread: 155mm (Front), 138mm (Rear, Double Tire)
• Chassis: Aluminum & Polycarbonate Resin Ladder Frame
• Suspension: Front/Rear Leaf Springs
• Caster Angle: 0° (Front & Rear)
• Camber Angle: 0° (Front & Rear)
• Toe Angle: 0° (Front & Rear)
• Dampers: Aluminum Dummy Dampers
• Drivetrain: Rear Double Axle Drive
• Transmission: 3-gear transmission (shifts operated via transmitter)
• Gear Ratio: (1st Gear) 32.49:1, (2nd Gear) 17.76:1, (3rd Gear) 10.66:1
• Diff. Gear: 3-bevel differentials
• Motor: TR Mighty-Tuned (35T)
• Tire Width/Diameter: 30mm/85mm (Front), 22mm/84mm (Rear)

About the model

• The massive, stately form of this tow truck is captured with exceptional realism. You won’t be able to wait to start towing!
• Stainless steel photo-etched front grille parts add to the authenticity. Separately sold LEDs can be used to light the model up.
• Visor and roof lights are metal plated components for that extra touch. Escape hatch, antenna and so on are recreated in style.
• Both front axles are steered on this model, with a single servo used to turn the wheels. Wheels turn realistically at different angles.
• A look here at the base ladder frame chassis, which is a sturdy affair composed of aluminum side channels and resin cross members.
• The body of the truck is adorned with a light bar that is constructed using a clear orange case and can be lit up with separately sold LEDs.
• This is a close-up upon the winch boom, which features dual winches and cables depicted using 5 meters of string provided in the kit.
• Boom length and angle can be adjusted, the former up to an impressive 586mm long. The latter gives three different angles.
• The underlift can be extended and retracted, and features adjustable forks. It turns on a joint to enable smooth cornering.
• Opening doors on the body give a realistic look, and also allow access to install separately sold MFC and Actuator units.
• Outriggers are affixed via cap screws, which can be loosened to allow manual extension, and give a further layer of realism.
• This is a close-up on the rear suspension, where a trunnion setup is employed using metal leaf springs and friction dampers.
• Dual rear tires provide a sturdy base for the vehicle, and also are given realistic tread pattern.

Please note! This is a true-to-scale 1/14 model kit that requires assembly and painting. Paints, electronic components and tools are not included in the kit!

Additionally needed electronics

Here are our recommendations for this model. Of course, you can also choose other suitable parts. If you have any questions about compatibility, please do get in touch with us!

• Tower Pro digitaalne servo MG958
• Futaba Attack 4YWD Radio with R214GFE Receiver
• Hobbywing QuicRun WP 1060 ESC 60A (Brushed) 2-3S Car 1/10
• Redox NiMH battery 7,2V 5000mAh (Tamiya connector) (alternatives: Redox NiMH battery 7,2V 3500mAh (Tamiya connector), Vapex NiMH battery 7,2V 2500mAh (Tamiya connector), Vapex NiMH battery 7,2V 3000mAh (Tamiya connector), Vapex NiMH battery 7,2V 4000mAh (Deans connector))
• HotRC N8 1-8S NiMH charger (20W)

Recommended colours

These are the colours recommended in the Tamiya guide. You are always free to choose your own colour scheme. You can find all our colours here.

• Tamiya TS-6 Matt Black (Flat) (alternatives: Tamiya Mini XF-1 Black (Flat))
• Tamiya TS-14 Black (Gloss) (alternatives: Tamiya Mini X-1 Black (Gloss))
• Tamiya TS-17 Aluminium (Gloss)
• Tamiya TS-26 Pure White (Gloss)
• Tamiya TS-29 Black (Semi Gloss) (alternatives: Tamiya Mini X-18 Semi Gloss Black)
• Tamiya TS-47 Chrome Yellow (Gloss)
• Tamiya TS-71 Smoke (Gloss)
• Tamiya TS-82 Rubber Black (Flat)
• Tamiya AS-18 Helehall (IJA) spreivärv
• Tamiya Mini X-11 Chrome Silver (Gloss)
• Tamiya Mini X-18 Semi Gloss Black (alternatives: Tamiya TS-29 Black (Semi Gloss))
• Tamiya Mini X-27 Clear Red (Gloss)
• Tamiya Mini XF-1 Black (Flat) (alternatives: Tamiya TS-6 Matt Black (Flat))
• Tamiya Mini XF-3 Yellow (Flat)

If necessary, we can help with assembling the model and painting the bodywork – please get in touch with us.